Generally there is no need to change port numbers, but if you should need to do so you can manually set the port number by opening the Server Settings tab in the Operations Center and manually entering port numbers on the Host tab. Make sure you click on Save at the bottom of the page after making changes.
When changing the communication port you will need to manually restart the FotoWare server applications that run on the server to get them to run on the new port. You may also need to reconfigure parts of your system:
FotoStation clients may have been set up to connect to Index Manager using port 7000. Hence, all archives that point to Index Manager using this port will need to be reconfigured. Refer to the FotoStation documentation to see how that is done.
Index Manager Unions may need to be set up again if they connect to indexes over fwp protocol on a given port number. More information can be found in the Unions topic in the Index Manager documentation.
FotoWeb connections to Index Manager over fwp may need to be reconfigured if they have previously used the standard port 7000. Read more about this in the archive configuration topic in the FotoWeb documentation.
Enforcing secure connections
Go to the Server Settings tab in the Operations Center and tick the box labeled Require SSL from clients. Then, the server will not respond to communications on the non-encrypted port. I.e. FotoStation clients, FotoWeb clients and users accessing the Operations Center to configure services have to connect on the secured port (7001 by default).
Operations Center uses a self-signed certificate by default. Learn how to import and use a separate certificate obtained from a trusted source.
Learn more about securing the FotoWare installation.