Skip to main content

 

Documentation & User Guides | FotoWare

First-time-configuration

This topic takes you through the initial configuration of Color Factory after it has been installed.

Configuring basic server settings

The Color Factory service is configured using the Color Factory 7.0 administration program. By default the service will be set to start automatically when the system boots up, but after installation the service will remain stopped to let you configure the system before starting it. You can change the automatic startup preference in the Services Control panel in Windows. (Service name: FotoWare Color Factory 8.0 - short code FWCF)

 

To start the Administration Console, click on the Color Factory Configuration icon in the FotoWare program group in the Start menu.

Startup Wizard

The first time you start the administration program a wizard will take you through the process of activating your software, then let you configure basic settings and optionally set up your first processing channel.

Click Next to continue.

Color Factory Startup Wizard - step 1

Base folder

Color Factory Startup Wizard - step 2

In the first step in the startup Wizard you must choose a base folder for the images processed in the program. Within this base folder, Color Factory will create input and output folders for each channel you create (see below for an explanation of the concept of process channels) as well as error folders. You may of course create channels with input or output folders not located within the image base folder. However, centralizing the input and output folders in one location may make it easier to administer a complex setup.

Setting up a share

Color Factory Startup Wizard - step 3

Next, you may choose to automatically create a Windows network share of the image base folder. You may supply a share name if you wish – otherwise the folder name will be used. Click Next to continue.

Color Factory Startup Wizard - step 4

Finally, click on Finish to complete the startup wizard. If you would like to get right on with creating channels, check that box before clicking Finish. Otherwise, keep it unchecked to set global variables first in the configuration.

A note about the Color Factory process account: All FotoWare applications use a common process account that is set globally in the Operations Center. Even though Color Factory has its own console-based configuration interface, the process account that it uses to access volumes and shares is set in the Operations Center on the Server Settings tab.

Activating Color Factory

When the initial preferences have been set, you will be asked to activate Color Factory. If you have your product code at hand (it's normally delivered by email) just copy the product key from the email to the activation window, making sure not to add any extra spaces at the end of the product key. A green checkmark in the activation window will indicate that the product key is valid.

When you click Next, the activation wizard will contact the FotoWare activation servers and exchange activation keys to allow your software to run.

After activation the Color Factory configuration will open and let you start configuring your workflows.

  • Was this article helpful?